Plus-vision U7-137SF User Manual download pdf (Page 35)

E-35

General Operation

If the password input display appears when the power is turned on

When a password has been registered, the “Password” input window appears on the projected image when the power is turned

on. The projector continues projecting this image until the correct password is input. At this time, only the STANDBY button (power

off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see

E-34.

Input the password using the number buttons (1 to 4).

Be sure to input the registered 4-digit number.

Example: To input the password “2441”

Press number button “2”. An “

” (asterisk) appears at the first place.

Next press number buttons “4”, “4” and “1” in that order. Asterisks appear in all

four places.

If the password matches, the window turns off and the projector can be used

normally.

Canceling the password/Changing the password

The password is canceled and changed using the menus. For instructions on operating the menus, see “Menu Operation Method”

on E-37.

Canceling the password

Select “Security Lock” in the “Option” menu and set it to “Disable”.

This clears the password and disables the security lock.

The password input display no longer appears when the power is turned on.

Changing the password

After setting “Security Lock” to “Disable” as described above, set it back to “En-

able”. The menu closes and the password registration display appears.

Protecting the network settings by password

The network settings can be protected by password. Refer to the “Image Viewer

/ Network” manual.

[Password input window]

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 66 67

No comments

Plus-vision U7-137SF User Manual Page 35